Cisco CCNA 200-301 Practice Test

Cisco Practice Tests

Question 1 / 55 - Mode : Exam
Which command can be used to verify that the current IPv6 path matches the desired route to the server? A. show ipv6 cef B. show ipv6 mroute C. show ipv6 neighbors D. show ipv6 route Which command is used to create a standard numbered IPv4 ACL? A. access-list numbered B. ip access-list C. numbered access-list D. access-list ip E. access-list An enterprise plans to start using a public cloud service, and is considering different WAN options. The answers list four options under consideration. Which one option has the most issues if the company chooses one cloud provider but then later wants to change to use a different cloud provider instead? A. Using private WAN connections directly to the cloud provider B. Using an Internet connection without VPN C. Using an intercloud exchange D. Using an Internet connection with VPN Which IOS command always displays OSPF hello timer settings? A. show ip protocols B. show ip route C. show ip ospf interface D. show ip ospf neighbor E. debug ip ospf events Which of the following commands will display one line of information per port channel? A. show etherchannel summary B. show interface port-channel C. show etherchannel port-channel https://www.learncisco.net/courses/icnd-2/etherchannel-and-l3-redundancy/configuring-etherchannel.html You want to change the VLAN for FastEthernet 0/2. Which command should you use to do so? A. switchport access B. name C. vlan id D. vlan name E. show vlan brief https://www.learncisco.net/courses/icnd-1/medium-size-switched-network-construction/vlans-and-trunk.html Assuming the default switch configuration, which VLAN range can be added, modified, and removed on a Cisco switch? A. 1 through 1001 B. 2 through 1001 C. 1 through 1002 D. 2 through 1005 https://www.learncisco.net/courses/icnd-1/ethernet-lans/starting-a-switch.html The type of service field in an IPv4 header is used for QoS. Which field in the IPv6 header is used for QoS? A. Traffic class B. Flow label C. Next header D. Source address E. Hop limit F. Destination address Which Cisco IOS command is used to advertise a default route into an OSPF domain regardless of whether a default static route is configured? A. default-information originate B. default-information originate always C. default-information originate permanent D. default-information originate no-check Which VTP mode forwards advertisements but does not synchronize VLAN configuration? A. Client B. Off C. Transparent D. Server Of the figures shown, which depicts an accurate Clos Architecture? A. Topology A B. Topology B C. Topology C D. Topology D Wired Ethernet and Wi-Fi are based on which two IEEE standards, respectively? A. 802.1, 802.3 B. 802.1, 802.3 C. 802.3, 802.11 D. 802.11, 802.3 The Wi-Fi Alliance offers which of the following certifications for wireless devices that correctly implement security standards? A. WEP B. WPA2 C. 802.11 D. AES What statements describe the purpose and functions of VLANs for improving a poorly designed network? (Choose three) A. The prevention of specific users within one VLAN from accessing a designated remote server B. The option to group stations that are segmented logically by functions or groups C. The ability to implement access and security policies within particular groups of users D. The flexibility of implementing VLANs across multiple floors E. The provision of protocols and port numbers https://www.learncisco.net/courses/icnd-1/medium-size-switched-network-construction/vlans-and-trunk.html Which statements accurately describe a network? (Choose three) A. A network is a collection of connected devices that have the ability to communicate with each other B. Networks are capable of transmitting data in many kinds of environments, such as homes, small businesses, and large enterprises C. A main office can have hundreds or even thousands of people who depend on network access to do their jobs D. A main office usually has one large network to connect users E. Remote locations cannot connect to a main office through a network F. The purpose of a network is to allow workers access to all information and components that are accessible by the network https://www.learncisco.net/courses/icnd-1/building-a-network/the-functions-of-networking.html If EX is the code for EIGRP External Routes, then what is the code for EIGRP Internal Routes? A. IX B. L C. I D. D You are tasked with configuring a switch so that it can be accessed remotely. What do you need to configure in order to accomplish this? (Choose two) A. The interface range in use B. A hostname for the switch C. An IP address and subnet mask D. A default gateway https://www.learncisco.net/courses/icnd-1/ethernet-lans/starting-a-switch.html Which command displays information about security options configured on an interface? A. show port-security interface [interface-id] B. show port-security [interface-id] C. show port-security[address] D. show security [interface-id] You want to disable the negotiation of trunking for all FastEthernet ports. Which commands are required to do this? (Choose two) A. interface range FastEthernet 0/1-24 B. show vlan brief C. switchport access vlan 2 D. switchport mode access With IEEE 802.1x, which role does a LAN switch typically play? A. Authentication server B. Supplicant C. Translator D. Authenticator Of the different public cloud WAN options, which have quality of service capabilities to ensure end-to-end application requirements? (Choose three) A. Internet B. Intercloud exchange C. Ethernet WAN D. MPLS VPN E. Internet VPN Which of the following cloud services is most likely to be purchased and then used to later install your own software applications? A. IaaS B. PaaS C. SaaS D. SLBaaS You have implemented DAI on a Layer 2 switch in your network. Now you want to monitor the ARP message rates with an average of four received ARP messages a second. Which command(s) would need to be utilized to accomplish this? (Choose two) A. ip arp inspection limit rate 8 burst interval 2 B. ip arp inspection limit rate 4 burst interval 2 C. ip arp inspection limit rate 10 burst interval 5 D. ip arp inspection limit rate 20 burst interval 5 Which command is used to disable CDP on an interface? A. no lldp enable B. no run C. no lldp run D. no cdp enable E. no enable F. no cdp run What statements describe stateless autoconfiguration? (Choose two) A. At boot time nodes send router solicitations to promptly receive router advertisements B. Router advertisements are sent to the all-nodes multicast address C. Router advertisements are sent periodically by routers out their non-configured interfaces D. The ipv6 autoconfig [default] command configures the interface https://www.learncisco.net/courses/icnd-1/introducing-ipv6/stateless-autoconfiguration.html Which DSCP marking group was created to be backward compatible with Internet Protocol Precedence (IPP) values? A. EF B. AF C. CS D. PF When using NAT to translate private IPv4 addresses to public IPv4 addresses, what term is used to identify the private IPv4 address? A. Inside local B. Outside local C. Outside global D. Inside global Using the exhibit as a reference, how many JSON objects are there? A. 11 B. 1 C. 2 D. 12 __________ means that the QoS tool changes one or more header fields, setting a value in the header. A. Marking B. Classifying C. Insertion D. Qualifying Which of the following behaviors are applied to a low latency queue in a Cisco router or switch? (Choose two) A. Shaping B. Policing C. Priority scheduling D. Round-robin scheduling What is the best definition of a WAN? A. Remote access to resources across a high speed link B. Local access to resources C. Local Internet access D. Core network resources What are some perceived benefits of controller-based networks as compared to traditional networks? (Choose two) A. New operational models that allow for a single device to be instantiated with the entire network in mind B. The use of APIs to mass-configure network devices, allowing for more consistency and fewer errors C. The use of DevOps approaches in the network to increase efficiency and productivity D. The use of legacy approaches in the network to increase efficiency and productivity In Software-Defined Access (SDA), which of the answers are part of the overlay data plane? A. LISP B. GRE C. OSPF D. VXLAN Switches use MAC addresses and a MAC address table to decide whether to filter, forward, or flood frames. Which statements describe how switches learn where MAC addresses are within a LAN? (Choose two) A. When a frame is received, the switch associates the destination port and MAC address of the incoming frame with the port it came in on B. If a MAC address is unknown, a switch will flood all ports exceptthe one it came in on C. When a frame is received, the switch uses a signaling protocol to map and then associate a source MAC address to the port number it came in on D. When a frame is received, the switch looks atthe source MAC address and associates it with the port number the frame used to enter the switch https://www.learncisco.net/courses/icnd-1/ethernet-lans/developing-design-for-layer-2.html Which command is used to set your Process ID to 5 for IPv6? A. ipv6 ospf 5 B. ipv6 router ospf 5 C. ipv6 unicast-routing 5 D. ipv6 ospfv3 5 Which of the following are available methods of classifying packets in DiffServ on Cisco routers? (Choose three) A. Matching the IP DSCP field B. Matching the 802.1p CoS field C. Matching fields with an extended IP ACL D. Matching the SNMP Location variable Review the topology diagram. Network 10.123.0.0/24 is the backbone area. Network 10.12.0.0/24 is area 1, and network 10.34.0.0/29 is in area 2. Which of the following are true? (Choose three) A. R1 is a backbone router. B. R1 is an ABR. C. R1 is an internal router. D. R3 would see the OSPF network of 10.12.0.0/24 as an intra-area route. E. R1 and R3 would have the same LSA information about the backbone area. How are PDUs handled during the peer-communication process? (Choose two) A. The Internet layer encapsulates data and attaches a header to create a PDU known as a frame B. Header information within a PDU is required and can include information such as source and destination logical addressing C. The link layer provides a service to the network layer by encapsulating the network-layer packet into a PDU called a segment D. The application layer protocol begins the process by delivering PDUs to the transport layer https://www.learncisco.net/courses/icnd-1/building-a-network/tcpip-internet-layer.html Refer to the exhibit. A new subnet with 60 hosts has been added to the network. Which subnet address should this network use to provide enough usable addresses while wasting the fewest addresses? A. 192.168.1.56/26 B. 192.168.1.56/27 C. 192.168.1.64/26 D. 192.168.1.64/27 What is the name of the firewall feature that, when used, can maintain a historical database of each connection through a device: Where it was sourced, destined, and which protocol and protocol port it was using? A. Stateless Inspection B. Stateful Inspection C. Network Protocol Analysis D. Protocol State Analysis Which command is used on a Cisco IOS router to enable the DHCP Relay Agent feature on an interface? A. ip dhcp helper B. ip dhcp relay C. ip helper-address D. ip dhcp relay-agent E. ip dhcp transmit F. ip dhcp helper-address Host A and Host B sit in two different subnets. The path between the subnets of these two hosts runs through three different Layer 3 forwarding devices (routers and Layer 3 switches). A network engineer uses the APIC-EM Path Trace ACL Analysis tool to analyze the path used for Host A to send packets to Host B. Which part of the function is done specifically by the ACL Analysis or ACL Trace part of the tool? A. Discovery of the topology that exists between the two hosts B. Analysis of the Layer 3 forwarding decisions in the path from Host A to B C. Analysis of the Layer 2 forwarding decisions in the path from Host A to B D. Analysis of the impact of ACLs on the packets that would flow from Host A to B Which command is used to view the neighbor discovery table on a PC? A. show ipv6 neighbor B. show ipv6 neighbors C. netsh interface ipv6 show neighbor D. netsh interface ipv6 show neighbors Suppose you would like to select a method to protect the privacy and integrity of wireless data. Which one of the following methods should you avoid because it has been deprecated? A. TKIP B. CCMP C. GCMP D. EAP Which statement describes how to create VLANs? A. Use the [vian interface] command B. Use the [vlan] global configuration command C. Use the [switchport vlan name] command https://www.learncisco.net/courses/icnd-2/vlans-and-spanning-tree/vlan-operations.html In what security zone are the public web servers located? A. DMZ B. Inside C. Outside D. Campus You have configured your PC with multiple default gateways. R1 is the primary default gateway. R2 is the secondary default gateway. What is the best action to ensure redundancy of the default gateway if R1 goes down? A. Create an entry in the R1 routing table to route traffic to R2 B. Manually change the primary default gateway from R1 to R2 C. Ensure that you are using a First Hop Redundancy Protocol D. Nothing, as multiple gateways have been configured What commands would you need to configure to enable DHCP Snooping so that PC4 couldn’t become a rogue DHCP server? A. Configure the following on SW 2: ip dhcp snooping, ip dhcp snooping vlan 10, int gi0/12, ip dhcp snooping trust B. Configure the following on SW 1: ip dhcp snooping, ip dhcp snooping vlan 10, int gi0/24, ip dhcp snooping trust C. Configure the following on SW 2: ip dhcp snooping, ip dhcp snooping vlan 10, int gi0/24, ip dhcp snooping trust D. Configure the following on SW 2: ip dhcp snooping, ip dhcp snooping vlan 20, int gi0/24, ip dhcp snooping trust E. Configure the following on SW 2: ip dhcp snooping, ip dhcp snooping vlan 20, int gi0/12, ip dhcp snooping trust F. Configure the following on SW 1: ip dhcp snooping, ip dhcp snooping vlan 20, int gi0/24, ip dhcp snooping trust You want to verify the Cisco IOS software version, ROM version, amount of memory, type of processor, number and types of interfaces, as well as the configuration register value on your 2900 series IOS router. What command will allow you to accomplish this? A. Show startup-configuration B. Show running-configuration C. Show version D. Show flash What can VLANs be used for? (Choose two) A. To maximize device resources B. To segment a physical switch into logical broadcast domains C. To prevent specific protocols from entering your network D. To eliminate the need for routers When using the snmpget application, what must be specified in order to manually obtain data? (Choose two) A. The OID number B. The SNMP manager ID C. The IP address of the network device you are querying D. The NMS polling number https://www.learncisco.net/courses/icnd-2/network-management/snmp-v1-v2c-v3-overview-and-configuration.html You have an address of 172.16.142.10/21. What are the network ID, directed broadcast, first host, and the last host? A. The network ID is 172.16.140.0, the directed broadcast is 172.16.148.255, the first host is 172.16.140.1, and the last host is 172.16.148.254 B. The network ID is 172.16.96.0, the directed broadcast is 172.16.168.255, the first host is 172.16.96.1, and the last host is 172.16.168.254 C. The network ID is 172.16.128.0, the directed broadcast is 172.16.163.255, the first host is 172.16.128.1, and the last host is 172.16.163.254 D. The network ID is 172.16.136.0, the directed broadcast is 172.16.143.255, the first host is 172.16.136.1, and the last host is 172.16.143.254 https://www.learncisco.net/courses/icnd-1/lan-connections/network-addressing-scheme.html Which of the following commands enables PortFast on an access port? A. spanning-tree portfast default B. spanning-tree portfast C. spanning-tree bpduguard enable D. spanning-tree portfast bpduguard default https://www.learncisco.net/courses/icnd-1/medium-size-switched-network-construction/performance-with-spanning-tree.html Review the topology. All subnets exist in OSPF area 0. Which command, if issued on R3, would show all the LSAs known by R3? A. Show running-config B. Show ip ospf interface C. Show ip ospf neighbors D. Show ip route ospf E. Show ip ospf database Which statements correctly define VLANs? (Choose two) A. VLANs can span many different Layer 3 routers B. VLANs can span many different Layer 2 switches C. VLANs divide a single physical collision domain into multiple logical collision domains D. VLANs divide a single physical LAN into multiple logical LANs

Our Recommended Premium CCNA Training Resources

These are the best CCNA training resources online:

Click Here to get the Cisco CCNA Gold Bootcamp, the most comprehensive and highest rated CCNA course online with a 4.8 star rating from over 30,000 public reviews. I recommend this as your primary study source to learn all the topics on the exam.

Want to take your practice tests to the next level? AlphaPrep’s purpose-built Cisco test engine has the largest question bank, adaptive questions, and advanced reporting which tells you exactly when you’re ready to pass the real exam. Click here for your free trial.

The CCNA 200-301 is for the Cisco Certified Network Associate (CCNA) Implementing and Administering Cisco Solutions exam. You can use the practice test to check your knowledge and improve your understanding in preparation for the Cisco CCNA certification exam.

The Cisco CCNA 200-301 practice exam tests include questions to test your knowledge and skills related to Cisco networking fundamentals, which helps you pass the actual exam.

The Cisco CCNA exam objectives include Cisco network fundamentals on routers, switches, IP addresses, etc., network access, IP connectivity such as static and dynamic routing protocol, IP services, network security fundamentals, and automation and programmability.

Cisco CCNA 200-301 Practice Test

Complete this form to get your score report

Our Recommended Premium CCNA Training Resources